The digital timer control is adjustable up to 9999 seconds. The heat press machine also features a digital temperature gauge ranging from 0 - 200°C up to 400°F. Keeping pressing the button "SET" for a while can switch Fahrenheit and Celsius temparature back and forth.The manual open and close handle is easy to operate and can be adjusted with the pressure knob at the rear of the machine. Its industrial strength and durability allows for long-term use, making it a great investment with exceptional value amongst its competitors.
Fully digital temperature and time control, LCD displays show the temperature and time. The special thickened heating plate effectively guarantee the even and stable teperature. Aluminum heat plate, Heating uniformity on the surface.Teflon coated on the heat plate , convenient and attractive appearance. Signal indicator when transfer press over. The pressure can be adjust easily. The silicon pad can endure maximum 350 degree without any distortion. 70° open of heating plate, convenient for operation very much. Integrated electric control system for simply adjusting and maintenance. Dual electric system protection provides safety operation. Temperature Range:0 400°C (about 750°F). Time Range:0 999 second. Working table: 15" x 15" (38cm38cm). Be careful of the hot heating surface. Please make sure the heating temperature and transfer time are correct. In order to extend the service life of this machine, please turn the machine off for 15 minutes after using it continuously for 4 hours. You may refer to Suggested Time and Temperature? Chart to determine the suitable temperature and time according to the material. Each time you put through power supply and turn power switch on, the heat plate will take some time to warm up to reach the target temperature. Warm-up time is about 10-20 minutes (to reach 360°F/ 180°C) for the first press.
Please don't set the temperature to more than 480°F/ 250°C or it will shorten the service life of the machine. Trouble shooting for transfer print quality.
The Clamshell can't open. Please Release the pressure knob, then use the handle to open it. Or start the machine, the heat will soon be ok to open the clamshell!
The temperature is too low; or the pressure is not even; or the time is too short. The time is too long which led to ink diffusion.The Image has no luster. The pressure is too high; or the temperature is too high. Part of design is indistinct. Heat printing zone or the heating is not even. Heat printing time is too long. Depth of color is not the same. Pressure not even or the coating is not even. Paper stick to the object. The temperature is too high; or the coating of the object is not good. Pls check the temperature too high, voltage wrong, or enter the. 1x Removable Silicone Pad & Cotton Pad.
We have warehouses in the USA. E-mails are answered Monday through Saturday. Please allow up to 48 hours for a response to your message. The item "15x15 DIY Digital Clamshell T-Shirt Heat Press Machine Transfer Sublimation US" is in sale since Saturday, November 16, 2019. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses".
The seller is "heatransferpro" and is located in Houston, Texas. This item can be shipped to United States.